Rubber Magnet

• Magnet Flux Density : Refer to the draft
• Curie Temperature(°C) : 120°C
• Tensile strength (KG F/Cm^{2) : Over 15}
• Volume Resistivity e(Ohm Cm) : e > 1 x 10⁹ (Ohm Cm)

Double Coated Tape (Adhesive Rubber Magnet Model)

• Adhesive power : Greater than 400g Adhesive Power shall be measured based on standard A1107 of KS standards

Standard Test Condition

• Temperature and Humidity
  -The measurement of Magnet Flux Density will be done under the condition (20±10°C) and(65±25%)humidity.
• However, It is measured under the condition of (20±10°C) and (65±25%) in case of disagreement.

Measurement Place

• The measurement of Magnet Flux Density should be done at the place not affected by external magnetic and other magnetic materials

Measurement Equipment

• The performance of Gauss meter
  1. Resolution : 0.1G
  2. Accuracy : ±0.1% of reading (including probe)
  3. Temperature Effect : <±0.02% Reading from 0°C to +50°C